Tidal Stone
Sea-worn stone in a
bright, natural hue.
Printer Friendly
* Special Order only.
SIZES Random 3.5" - 15.75" long by 3.5" - 11.75" high
APPLICATION
Residential |
Light Commercial |
Commercial |
Exteriors |
|
Walls/Backsplashes |
X |
X |
X |
X |
INSTALLATION
|
Average |
Application |
Coverage |
Aesthetic Characteristics |
|
1.25" |
1/2" Grout Joint |
150 sq. ft. per pallet, grouted |
RANDOM SHADE VARIATION |
TECHNICAL DATA
Density of Structural |
Freeze Thaw / Efflorescence |
Comprehensive |
Flexure |
Tensile |
Water |
Shear Bond |
ASTM C-567 |
ASTM C-67 |
ASTM C-192, C-39 |
ASTM C-348 |
ASTM C-190 |
UBC Std. 15-5 & 32-12 |
ASTM C-482 |
15 psf maximum |
Less than 3% mass loss in 50 cycles/None visible |
Minimum of 1800 psi in 28 days |
No more than 10% deviation |
No more than 10% deviation |
22% average maximum |
Minimum 50 psi |
MAINTENANCE
Care should be taken to avoid smearing mortar on the surface of the veneers. Accidental smears should be removed using a dry whisk broom only after mortar has dried completely. Never use a wet brush or wire brush. Do not power-wash, sandblast, use acid or acid-based products. Dirt or other materials may be removed with a strong solution of granulated soap or detergent and water with a bristle brush. Do not use a wire brush as it will cause damage to the surface. Rinse immediately with fresh water. Regular maintenance requires rinsing the wall with water occasionally to remove dirt.
NOTES
- Suitable for interior and exterior vertical surfaces.
- Appropriate for use in exterior wall applications in both freezing and non-freezing climates when proper installation methods are followed.
- Not for exterior use below grade.
- Not for use in direct contact with pool chemicals or in wet areas such as showers.
- Your decision to mortar or dry-stack your Manufactured Stone project will impact the overall appearance of your final installation.