Chiseled Ready Stack

Modern architecture in a wide range of colors to
complement any décor.

Print Page Printer Friendly

Moon Glow MS80

Autumn Bronze MS70*

Amber Sun MS76*

Golden Dawn MS84*

Harvest Blend MS75

Torch Light MS85*

Dappled Shade MS72

Mystic Silver MS82*

Spring Moss MS81

* Special Order only.

SIZES Random 8" - 20" long by 4" high

APPLICATION

	Residential	Light Commercial	Commercial	Exteriors
Walls/Backsplashes	X	X	X	X

INSTALLATION

Average Thickness	Application Recommendation	Coverage	Aesthetic Characteristics
1.19"	Dry-Stacked	150 sq. ft. per pallet, dry-stacked	RANDOM SHADE VARIATION Extreme color and texture variation from piece to piece and within each piece for a random look. Look of final installation will be unique. Review range of product before making final selection.

TECHNICAL DATA

Density of Structural Lightweight Concrete	Freeze Thaw / Efflorescence	Comprehensive Strength	Flexure Strength	Tensile Strength	Water Absorption	Shear Bond Strength
ASTM C-567	ASTM- C-67	ASTM C-192, C-39	ASTM C-348	ASTM C-190	UBC Std. 15-5 & 32-12	ASTM C-482
15 psf maximum	Less than 3% mass loss in 50 cycles/None visible	Minimum of 1800 psi in 28 days	No more than 10% deviation	No more than 10% deviation	22% average maximum	Minimum 50 psi

MAINTENANCE

Care should be taken to avoid smearing mortar on the surface of the veneers. Accidental smears should be removed using a dry whisk broom only after mortar has dried completely. Never use a wet brush or wire brush. Do not power-wash, sandblast, use acid or acid-based products. Dirt or other materials may be removed with a strong solution of granulated soap or detergent and water with a bristle brush. Do not use a wire brush as it will cause damage to the surface. Rinse immediately with fresh water. Regular maintenance requires rinsing the wall with water occasionally to remove dirt.

NOTES

Suitable for interior and exterior vertical surfaces.
Appropriate for use in exterior wall applications in both freezing and non-freezing climates when proper installation methods are followed.
Not for exterior use below grade.
Not for use in direct contact with pool chemicals or in wet areas such as showers.
Your decision to mortar or dry-stack your Manufactured Stone project will impact the overall appearance of your final installation.